● Capacities from 300 kg to 2,400 kg
● 30 standard car sizes. The smallest floor area measures 0.78 x 1.04 m and the largest 1.56 x 2.99 m.
● Travelling speeds up to 1.0 m per second
● Lifting heights up to 250 m with standard accessories
● FC or direct-on-line motor controller
● Three optional car operating systems: fully collective, single-automatic or semi-automatic control system.
● Optional location of car door(s).
● Drive machinery located on the car (no costly machine room required)
● Electric cabinet inside the car, integrated in the wall
● Durable materials: extruded aluminium car wall panels with car support frame and mast sections of hot dip galvanised steel. All electric cabinets and landing control boxes of stainless steel. Stainless steel car walls available for extremely aggressive environments
● Wide range of optional extras

Payload capacity 300 – 2,400 kg
Speed 0.4–1.0 m/s
Max. lifting height 250 m (increased lifting height on request)
Car width (internal) 0.78–1.56 m
Car length (internal) 1.04–2.99 m
Car height (internal) 2.17 m
Motor control DOL/FC
No. of motors 1–2
Safety device type GF or GFD
Power supply range 380–500 V, 50 or 60 Hz, 3 phase
Type of mast Type "A", "A-Mini", "FE" or "A-50"
Length mast section 1.508 m
Weight mast section with 1 rack 53, 58, 100 or 118 kg
Rack module 5

A new standardized concept
The new ALIMAK SE-Ex lift range is based on a modular design enabling specific customer requirements to be met by using proven standard components. The system provides an infinitely variable range of lifting heights, car sizes and capacities capable of meeting the most stringent specifications.

The ALIMAK SE-Ex range offers lifting capacities of between 400 and 1,600 kg and has direct-on-line motor control. The SE-Ex range is available in 15 car sizes ranging between 0.91 x 1.30 m and 1.56 x 2.21 m. It travels at speeds of 0.4–0.6 m/s. The new advanced Alimak Lift Control system ALC-II ensures both efficiency and ease of use.

Max. payload capacity 400–1,600 kg
Travelling speed 0.4–0.6 m/s
Max. lifting height 75 m (increased lifting height on request)
No. of motors 1 or 2 with direct-on-line (DOL) motor control
Lift car sizes 15 car sizes available, min. 0.91 x 1.30 m, max. 1.30 x 2.73 m or 1.56 x 2.21 m
Power supply range 380–480 V, 50 or 60 Hz, 3 phase
Fuse ratings 35 A, 63 A or 100 A
Type of mast Rectangular (FE) or square (A50), tubular steel with integrated rack
Length mast section 1.508 m
Min. hoistway/shaft opening 1.590 x 1.625 m (Installation with FE mast)
Pit depth 1.1 m
Regulations ATEX or NEC
Protection class ATEX Zone 1 or 2, Gas group I, IIA or IIB, Temp. class T1–T4
Protection class NEC Class 1 Division 2, Gas group C or D, Temp. class T1–T4
For other demands or specifications, please contact Alimak AB.

● Capacity 300, 400 and 450 kg
● Lift car sizes: 780 x 1,040 and 910 x 1,170 mm
● Travelling speeds: 0.63 m/s at 50 Hz and 0.76 m/s at 60 Hz
● Direct-on-line motor controller
● Two car operating systems: single-automatic or semi-automatic control system
● Optional location of car door(s)
● Electric cabinet inside the car, integrated in the wall
● Durable materials: extruded aluminium car wall panels with car support frame and mast sections of hot dip galvanised steel.
● All electric cabinets and landing control boxes of stainless steel
● Wide range of optional extras

Payload capacity 300, 400 and 450 kg
Speed 0.63 m/s (50 Hz) and 0.76 m/s (60 Hz)
Lift car sizes (internal) 0.78 x 1.04 and 0.91 x 1.17 m
Lift car height (internal) 2.17 m
Motor control Direct-on-line (DOL)
No. of motors 1
Safety device type GF
Power supply range 380–480 V, 50 or 60 Hz, 3 phase
Type of mast Tube guide rail type "A" or "A-mini" (FE or A-50)
Length mast section 1.508 m
Weight mast section with 1 rack 53 or 58 kg (100 or 118 kg)
Rack module 5